More than just a Source. A Solution. Made in USA with Pride Call Us Toll Free: 1.800.251.8351   I   Email
Micro = Lam Carried Member
Truss To Truss Heavy Load Hangers
Square-Skewed-Hip & Jack-Terminal Radial Member

BH Bucket Hangers bolt to 2 x 8 min. webs.
BHR Radial Hangers for multiple members.
BHS Hangers are skewed 45°, specify right or left hand.
BHJ Hangers carry 2 ply hip truss and end jack.
BHT Terminal Hangers accept 45° hips, one or two ply, plus single ply end jack. Bolting plate is 1/4 x 7 x 27 high.

Material : BH, BHS & BHJ all 1/4" A-36 steel. BHT pockets are 3/16" A-36 steel.
Finish : Black copolymer finish.

Caution - 2 x 8 maximum bottom chord on carrying girder. Skewed version requires special location of web.

Warning - all girder plys must be securely fastened together to act as one unit and the hanger bolts are not to be considered for this purpose.

Unit of Measure

Pocket Size

N/A 3 1/4 x 7 1/4

Pocket Nails

N/A (4) 10d
Material1 N/A A-36 Steel

Finish

N/A Black Copolymer

Load @ 1 1/2 Long Bolt in Carrying Member

N/A 2840

Load @ 3 Long Bolt in Carrying Member

N/A 5080

Load @ 4 1/2 Long Bolt in Carrying Member

N/A 5580

Wind Uplift

N/A 625

Load @ 1 1/2 Long Bolt in Carrying Member

N/A 2160

Load @ 3 Long Bolt in Carrying Member

N/A 3400

Load @ 4 1/2 Long Bolt in Carrying Member

N/A 5000

Wind Uplift

N/A 510
  • 1 BHT pockets are 3/16" A-36 steel.